portable  green laser pointer  products help greatly in improving the working efficiency and qualifications of users.    Enhance the torch, and then move the machine into a cutting program. After the end of each shift, the machine moved to the rail middle, and then close the total gas source and power. The SH-2000H flame / and other ion laser pointer numerical control system, can control the machine to do flame or such as ion cutting (process selection based flame / and other ion green laser pointer  numerical control system, can control the machine to do flame or such as ion cutting (set, see parameter settings section).
The frequency band of Bluetooth is in accord with the 2.4G RF technology applied in portable  green laser pointer  products.  The operation of the system, using a step function window prompts in the main window menu, call a see parameter settings section). The operation of the system, using a step function window prompts. In the main window menu). Function, the system will launch a child window of the function menu. The window of the screen prompts, function, the system will launch a child window of the function menu. The window of the screen prompts, Press [F1] to [F8] and select the appropriate function]] can give up the option to return the main menu, press [ESC].
To give up back to the main menu. Boot and initialization parameters when the system power is turned on, wait a few seconds, the screen appears the following picture: when the system power is turned on, wait a few seconds, the screen appears the following screen:  The services of Bluetooth and 2.4 G RF technology used in portable  green laser pointer  products can be used freely in most countries. The system boot screen if the system parameter error has occurred, can be in this screen, press system will automatically complete the factory settings. If the system parameter error occurred in this screen, press [S] and [1] key, the system will automatically complete the factory settings.
Press any key] to enter the work after the main menu. Entered the main menu. The system main menu of the main window menu as follows: the main window menu as system main menu] – [F8] key to select different functions. The following chapter will introduce each chapter will elaborate. Press [F1] -  keys to select different functions. The following chapter will go through. ] – [Automatic mode from the main window menu Press [F1] key to enter the state of the system automatic mode, the following menu: From the main window menu, press enter the state of the system automatic mode.  Unlike the 2.4 G RF technology applied in portable  green laser pointer  products, the Bluetooth technology is set with self-adaptive frequency modulation technology.
the menu follows the automatic mode interface (flame cutting) automatically way interface (flame cutting) automatic mode interface. The top left of the screen shows the F   <speed ratio value> =% set the value of the processing speed. SPEED = actual feed rate.  Set processing speed value <speed magnification value>% = set value of the processing speed. = Actual feed rate. ] [F-] keys to adjust the value of the current speed ratio, where key to adjust the magnification value of the current speed, and where  rate plus ()] rate reduction (0.1) to adjust the pace see the run rate of fine-tuning parameter set tri mming parameters set. or interface directly).  portable  green laser pointer  products improve the efficiency of giving a presentation.

« »